📞 Call📅 BookEstimate
📍 Hudson County · 07302

SPAN Smart Panel Installation in Jersey City, NJ

A SPAN panel replaces your breaker box with a 200A, 40-circuit panel that meters and controls every circuit from an app. In Jersey City it runs $6,500–$10,000 installed, takes about one day on site, and needs a NJ UCC electrical permit that we pull for you.

Jersey City is wall-to-wall pre-war rowhouses, brownstones, and multi-family conversions — the Heights, Journal Square, Bergen-Lafayette, and Downtown are full of homes built between 1890 and 1930 that still run on 100 amp service. Most are all-gas, so the base electrical load is genuinely low, which is exactly the situation where a SPAN panel's load management can carry a Level 2 EV charger without enlarging the service at all.

Free Jersey City Consultation →📞 (848) 294-1739
NJ Licensed & Insured
Permits Pulled
PSE&G Coordinated
4.9★ · 128 Reviews
✍️ By Michael Malfettone, Licensed Master Electrician📋 NJ Electrical Contractor License #17130🕐 Last updated September 2026
Local Reality

Smart Panels in Jersey City Housing Stock

That matters more in Jersey City than almost anywhere else in the state, because the alternative — a full 200 amp service upgrade — means getting into PSE&G's disconnect-and-reconnect queue, and in the row-house blocks it can also mean PSE&G running a separate overhead drop where two houses currently share one. A SPAN install on healthy existing service skips all of that. We still run the load calculation first, and if the numbers say your service is genuinely maxed out, we'll say so.

Michael Malfettone Jr. holds a Computer Science degree alongside his master electrician license, which is why we commission the panel rather than hand you a QR code — network on, cellular backup verified, every circuit named in plain English, and backup priorities set with you before we leave.

All about SPAN smart panels →Conventional panel upgrade in Jersey City →SPAN vs. 200 amp: which do you need? →
Permits & Timeline

The Jersey City permit process — we handle it

Jersey City runs an online permit portal — the fastest process in Hudson County. Electrical permits for a panel replacement are typically issued in 3–5 business days, with the final inspection scheduled within another 3–5. Fees run $200–$350 and are included in our quoted price. You never touch the portal.

Utility Coordination

Working with the utility in Jersey City

Jersey City is PSE&G territory. Here is the useful part: a SPAN panel installed on existing, healthy 100A or 200A service often does not require a PSE&G disconnect at all, which takes the 2–4 week utility scheduling window off your timeline entirely. If the meter socket or service entrance does need replacing, we file the PSE&G application and book the disconnect for your install day.

Common Questions

SPAN Smart Panel FAQs — Jersey City, NJ

Can a SPAN panel let me add an EV charger to my Jersey City rowhouse without a 200 amp upgrade?
Often, yes — and Jersey City is the best case for it in the state. Most pre-war rowhouses here have gas heat, gas hot water, and gas cooking, which keeps the calculated load around 55–65 amps on a 100 amp service. SPAN's dynamic load management throttles the charger when household demand spikes and runs it full-speed overnight, so the main breaker never sees an overload. We run the NEC Article 220 calculation before quoting, because if your load is already near the main, a service upgrade is the honest answer.
How much does a SPAN panel cost installed in Jersey City?
$6,500–$10,000 installed, permit and inspection included. A conventional 200 amp service upgrade in Jersey City is $2,500–$4,800 by comparison. Adding a Level 2 charger on the same visit and the same permit brings the combined job to roughly $7,800–$12,000 — meaningfully less than doing the two jobs on separate trips.
Do I need a permit for a SPAN panel in Jersey City?
Yes. Any main panel replacement in Jersey City requires an electrical permit under the NJ Uniform Construction Code and a final inspection before the panel is energized. We file through Jersey City's online portal — typically 3–5 business days — and meet the inspector ourselves.
Will a SPAN install mean waiting on PSE&G?
Frequently not. If your service entrance and meter socket are sound and we are not changing the service size, a SPAN swap can go from permit to inspection without a PSE&G disconnect — which is the single biggest timeline advantage over a conventional upgrade in Hudson County. If the entrance does need work, expect the usual 2–4 weeks of PSE&G scheduling and we'll tell you at the estimate.
Does a SPAN panel work in a Jersey City condo or multi-family?
In a condo, it depends on the building — you need board approval and confirmation that the building's main service supports your unit, the same as any panel work here. In a two- or three-family you own, SPAN gives real per-circuit visibility on whatever it feeds, which is useful for tracking down what the house meter is carrying. It does not replace separate utility metering, and in many Jersey City multi-families separating the meters is the higher-value job — we'll look at both.
Who Wrote This
Michael Malfettone, Licensed Master Electrician

Third-generation owner of Malfettone Electric, family-owned since 1977, with a Computer Science degree alongside the master electrician license. Michael has personally run panel and service work across Hudson County — pulling the permits, filing the utility applications, and meeting the inspectors himself.

NJ Electrical Contractor License #17130 · Family-owned since 1977 · Hudson & Essex County · Read Michael's full bio →
Also Serving

Smart Panels Across Hudson & Essex County

⚡ SPAN Smart Panel Hoboken⚡ SPAN Smart Panel Montclair⚡ SPAN Smart Panel Cedar Grove⚡ SPAN Smart Panels — Hudson & Essex

Thinking About a SPAN Panel in Jersey City?

Start with a free consultation — virtual or at the house. We'll run the load calculation and show you the SPAN price next to the conventional 200 amp price, so you can decide honestly. We handle the permits, and financing is available.

Get a Free Estimate →📞 (848) 294-1739